Insulation blanket/-board

Thermal insulation

Acoustic insulation

Suitable for pitched roof

Suitable for flat roof

Suitable for wall

Suitable for facade

Suitable for ceiling

Suitable for floor

Suitable for underground installation

Suitable for duct mounting

Material

Model

Surface finish

Suitable for tube mounting

Upholstery front/top vapor-tight

Material upholstery front/top

Halogen free

Upholstery rear/bottom damp proof

Material upholstery rear/bottom

With nail flange (reinforced fixation strip)

Can be glued

Mechanical fastening

Suitable for clamp-mounting

With decorative finish

Length (mm)

Width (mm)

Thickness (mm)

With fall

Fall (mm/m)

Fall ratio

Edge finish

Thermal conductivity (W/(m.K))

Dimensional thermal conductivity in moisture protected building part (W/(m.K))

Dimensional thermal conductivity on external wall, towards ground (W/(m.K))

Dimensional thermal conductivity horizontally in the ground (W/(m.K))

Heat resistance Rd ((m².K)/W)

Density (kg/m³)

Working temperature (°C)

With angle fillet

Self-adhesive

Sound absorption coefficient ISO 354

Dynamic stiffness according to EN 29052-1 (MN/m³)

Euro fire class according to EN 13501-1

Euro class smoke production according to EN 13501-1

Euro class flaming droplets/particles according to EN 13501-1

Max. moist absorption (kg/m²)

Compressive strength short-term load (kN/m²)

Compressive strength long-term load (kN/m²)

Max. point load (N)

Thickness tolerance

Applicable harmonized EN standard

Water vapour resistance factor according to ISO 10456

Pressure resistance level according to DIN 4108-10

Compressibility according to DIN 4108-10

Tensile strength level according to DIN 4108-10

Type approval according to BBR/EKS