Miniature circuit breaker (MCB) with auxiliary device EC002694

Overcurrent protective device with additional equipment in the electric installation, which is used in low voltage distribution lines and which protects lines against damage caused by heating due to high current.

Features 20

  1. 1

    Tripping characteristic (type/curve)EF000889

    Choose one value

    ABCCsDEFKZOther
  2. 2

    Number of PolesEF001391

    A number

  3. 3

    Rated currentEF000227

    A number in A

  4. 4

    Rated VoltageEF000228

    A number in V

  5. 5

    Rated short-circuit breaking capacity EN 60898EF006064

    A number in kA

  6. 6

    Rated short-circuit breaking capacity IEC 60947-2EF006065

    A number in kA

  7. 7

    Voltage typeEF000187

    Choose one value

    ACDCAC/DCOther
  8. 8

    Current limiting classEF002568

    A number

  9. 9

    FrequencyEF000416

    A range, from and to, in Hz

  10. 10

    Concurrently Switching N-neutralEF005997

    Yes or no

    YesNo
  11. 11

    Over voltage categoryEF002569

    A number

  12. 12

    Pollution degreeEF002570

    A number

  13. 13

    Width in Number of Modular SpacingsEF002950

    A number

  14. 14

    Recess depthEF000218

    A number in mm

  15. 15

    Additional equipment attached at deliveryEF008149

    Choose one value

    Auxiliary switchFault-signal switchAuxiliary switch / fault-signal switchShunt release (for power circuit breaker)Under voltage coilArc fault detection device (AFDD)Remote driveRemote releaseRemote turn-on switchMonitoring unit with automatic reclosingOther
  16. 16

    Rated switch current auxiliary deviceEF007680

    A number in A

  17. 17

    Rated voltage auxiliary deviceEF007683

    A number in V

  18. 18

    Control voltage type auxiliary equipmentEF008071

    Choose one value

    ACAC/DCDC
  19. 19

    Degree of Protection (IP rating)EF005474

    Choose one value

    IP00IP10IP12IP20IP21IP22IP23IP24IP2XIP30
  20. 20

    Construction size (according to DIN 43880)EFDE0025

    A number

Codes after each name are ETIM feature codes. Use them, not the names, in product data.